Distillation Unit

  • Distillation Unit

    Water still - BASIC/PH4 & XL models are designed for reliable continuous operation incorporating a host of features unmatched by comparable stills. It is easy to use, safe to operate, thoroughly reliable and above all Low Cost.

    Features:
    • Abundant Output. The still provides, 4 litres/hr of distilled water produced through a power input of 3KW by a chromium plated heater housed in a horizontal Glass Boiler
    • Distilled output is cool ensured by a high efficiency condenser. Temperature of distillate 25º C – 40º C tested for ambient room temperature of 30o C.
    • All units carry Marking

    Construction:
    • The stand is powder coated for long rust free Operation.
    • Heater is a 3KW Chromium plated heater fitted with a thermostat, which shuts off automatically in case of water supply failure.
    • The Boiler & Condenser are designed for high efficiency and provided with threading for easy plumbing of condenser
    • Boiler is provided with Teflon screw cork for insitu cleaning of the boiler.
    • All plumbing connections to the equipment are made via screw thread connectors



    Specification
    Water Still – BASIC/PH4
    Dimensions ( W x D x H)
    >PH4 50 cm x 15 cm x 45cm
    Weight 6 kg. Approx.
    Electrical 220/240V, 50/60 Hz.
    Power 3KW Heater.
    Water Supply Min. flow rate 1 litre/min.
    Min. pressure 3 p.s.i. (0.2 x 105 NM-2)
    Output 4 lit/hr
    Conductivity (using raw water) 3.0 – 4.0 μS/cm
    Conductivity (using treated water) 1.5 – 2.0 μS/cm
    PH 5.5 – 6.0
    Distillate quality Pyrogen free